If you would like to acquire a ready-made interface, contact me and we'll see what's possible. Source code contains a recorded dive log (straight from an Aladin) I used for tests, might be useful for someone. Report any issue you may find, I will at least try to help! I made it to replace my father's dead MemoMouse. The interface is working as-is for me, so I do not plan on improving it unless a bug fix is needed.
ALADDIN DATA TRAK SOFTWARE PDF
(I included here copies of these pages as PDF, just in case.) Notes No software needed to download data Built-in USB connector, no special reading devices required Automatically creates secure PDF report and CSV file. The only "errata" I could make is for the MemoMouse data structure, Note 4 (page bottom): don't need to send the data twice. Resourcesīig thanks to Wayne Heming who did all the hard work of figuring out the protocols: Screws are 6mm head / 3mm thread diameter self-tapping screws.
ALADDIN DATA TRAK SOFTWARE ARCHIVE
The STL files of my 3D printed case are provided if you want to reuse it as-is, or if you want to modify it there is a Fusion 360 archive file you can import. Our experienced sales team has in-depth knowledge of the refrigeration chain and food safety for the chain stores and the food industry. * If you plug the wires to the Aladin without the interface powered, the 2 wires will act as shorted and trigger button actions in your Aladin. The Data Track software can display your information in Spanish French, English and German as well as Metric and Imperial. The transfert will be immediate and will not wait for the Aladin (but do not wait too long or your dive logs will have wrong date&time! DataTrack syncs on the Aladin). You can also do backward and send the logs from the Aladin first, then transfert from DataTrack. Then use as a MemoMouse: initiate the transfert on DataTrack, then send the logs with the Aladin. Plug the MemoAladin first* to your computer with a micro-usb cable, then plug the 2 wires to your Aladin computer.
ALADDIN DATA TRAK SOFTWARE SERIAL
Serial port 2 RX is connected to the dive computer. Nothing else to do, it should work immediately (with the USB fix). Pump programmed for single or multiple runs. Pump parameters to be set (useful if a number of pumps need setting to the same configuration) Pump operation to be tested and monitored.
Upload code with Arduino for a STM32F103C8 board, 72MHz. The DataTrac ® PC Software can be used with the Pocket Pump, AirChek 3000 pump and Leland Legacy pump and enables: The pump to be operated from the PC. The board must be flashed with the appropriate bootloader (see the link provided above in Hardware). You need to add STM32 support to Arduino:
0 kommentar(er)
